The Ideal SoHo VPN Router for VDSL and Gigabit Fibre
The DrayTek Vigor 2765 series VDSL and Ethernet VPN routers are ideal for Small Office and Home Office networks. Featuring powerful Firewall and Content Filtering, configurable Quality of Service and an array of VPN capabilities, with the performance to make full use of FTTP Fibre Broadband.
Incorporating Wireless and VoIP features in ‘2765ac’ and ‘2765Vac’ models, the Vigor 2765 series provide a reliable, highly integrated and reliable network solution for SoHo environments.
VDSL and Ethernet RouterConnect the Vigor 2765 to Superfast Fibre with its integrated VDSL modem. Or connect to VirginMedia Cable and Ultrafast FTTP with Ethernet WAN.
AC1300 Wireless with MeshConnect DrayTek VigorAP Access Points to the router in a wireless Mesh. DrayTek’s Self-Optimising Mesh ensures access points are always connecting through best path to your Router.
Packed With FeaturesConfigure DrayTek’s rich feature set to fit your network with Route Policy, Quality of Service, VPN Matcher, DrayDDNS and more.
VigorACS Central ManagementUse the VigorACS central management platform to manage, monitor and configure the Vigor 2765 series routers remotely across multiple locations.
Powerful SoHo VPN RouterConnect remote locations with 2 VPN tunnels for Remote Dial-In User Teleworker and Dial-Out LAN to LAN VPN. Up to 200Mbps IPsec performance, with SSL and OpenVPN support.
4 Gigabit LAN Ports with VLANsAttach Computers, Servers and Network Attached Storage. Use VLANs to provide a fully separated Guest network, with up to 2 LAN subnets.
Product Diagram
Key Features
VDSL and Ethernet Router
Reliable and fast Internet connectivity with Failover backup WAN and powerful Route Policy.Powerful SoHo VPN Router
Up to 2 active VPN tunnels for LAN to LAN, Remote Dial-In Users and VPN services.
AC1300 Wireless with Mesh
802.11ac Dual-Band Wireless with 'ac' models. Use DrayTek Mesh to expand wireless coverage.DrayTek SSL VPN
Access the Vigor 2765ac's network remotely with a TLS encrypted VPN tunnel.
4 Gigabit LAN Ports with VLANs
Provide a fully separated Guest network, with support for 2 VLANs.VPN Matcher
Break through NAT and CG-NAT with DrayTek's VPN Matcher service for LAN to LAN and Teleworker VPNs.
Firewall & Content Filtering
Manage Internet access with Firewall, App Enforcement & Category-based Web Filtering.VigorACS Central Management
Easily provision, monitor and manage remote sites without on-site IT or dedicated staff.
DrayDDNS with LetsEncrypt Certificates
Free DrayDDNS address for each router, with automated LetsEncrypt SSL/TLS Certificates.Quality of Service with App QoS
Prioritise latency-sensitive applications such as Teams and Zoom, quickly & easily with App QoS.
Multi-Purpose USB Ports
Connect 4G modem, USB storage, USB thermometer and USB printers to share resources.Centralised LAN Management
Manage and provision 2 DrayTek VigorAPs and 2 VigorSwitches through the router.
VDSL and Ethernet Router
The Vigor 2765 is a VDSL or Ethernet WAN router with Gigabit performance, allowing you to make full use of DrayTek's advanced feature set, with Quality of Service, VPN and Content Filtering. Connect the Vigor 2765 to Superfast Fibre with its integrated VDSL modem. Or connect to VirginMedia Cable and Ultrafast FTTP with Ethernet WAN.
Either connection, or a 4G USB modem can be used as the primary or Failover connections, so that if the main Internet connection goes down, the Vigor 2765 can use its backup connections to guarantee reliable Internet access and VPN connectivity.
Powerful SoHo VPN Router
DrayTek's Vigor routers feature extensive VPN (Virtual Private Networking) capabilities. The Vigor 2765 series is no exception, its VPN capabilities are well suited to SoHo (small office, home office) environments. A VPN enables you to link remote offices and branch offices back to HQ, or home-based/mobile teleworkers back to your office.
The Vigor 2765 allows you to make full use of Fibre broadband with VPN. Up to 200 Mbps of IPsec VPN throughput for fast and secure connections, to VPN services and other offices.
Connect 2 VPN tunnels concurrently to access remote resources securely. Connect the Vigor 2765 in a branch office or home office to a head office for seamless access to network resources.
It supports all common industry standard VPN protocols, for it to connect to VPN services, link remote offices and handle connections from all types of VPN clients. Supporting IPsec IKEv1 & IKEv2 protocols with EAP and XAuth authentication, DrayTek's SSL VPN and L2TP for both LAN to LAN and Dial-In teleworker VPNs. In addition, teleworkers can connect to the router with OpenVPN.
User management for Dial-In Teleworkers is managed through the router's web interface, with mOTP 2-factor authentication available for IPsec, L2TP and SSL VPN Teleworker connections.
Connecting Remote Sites with LAN to LAN VPN
Supporting up to 2 concurrently active VPN tunnels and 200 Mbps of IPsec VPN throughput, the Vigor 2765 series is ideal as a branch-office or home-office router, to connect with a head office router such as the Vigor 3910.
Once connected, they have access to your office/remote resources through a secure encrypted tunnel allowing remote desktop, file sharing and seamless access to other resources and devices.
DrayTek SSL VPN for Dial-In Teleworkers & LAN to LAN
Connect up to 2 DrayTek SSL VPN tunnels. These encrypted tunnels securely link teleworkers or remote DrayTek Vigor routers back to your main office using SSL/TLS technology - similar to the HTTPS security that's used for most secure websites on the internet such as on-line banking and shopping services.
Teleworkers can connect with a secure SSL VPN tunnel to the DrayTek Vigor 2765, using the free DrayTek Smart VPN Client app. Available for Windows, macOS, Apple iOS (iPad, iPhone) and Android devices.
Connect VPNs from behind NAT with DrayTek's VPN Matcher
A typical requirement for connecting a VPN tunnel between two points is that the VPN server must be directly accessible on the public Internet. Sometimes this can be achieved with NAT Port Forwarding if the router is located behind another router, but if the router is connected to 4G Mobile Broadband or is behind Carrier-Grade NAT (CG-NAT), connecting to that VPN server may be impossible.
DrayTek's new VPN Matcher service helps DrayTek routers behind NAT to allow Dial-In Teleworkers to connect, or connect two DrayTek VPN routers that are behind NAT and could not normally establish a VPN tunnel.
AC1300 Wireless LAN with Mesh
The 2765 series 'ac' models provide 802.11ac simultaneous Dual-Band wireless for fast and efficient wireless connectivity. Multi-User MIMO allows the router to send to more than one device at a time, with each of its Antennas streaming data to different devices at once, improving efficiency over standard 802.11ac wireless and allowing the router to effectively serve more wireless clients.
With firmware 4.3.0, the Vigor 2765 'ac' wireless routers can be used as part of DrayTek's Mesh wireless system, allowing the router to work as the Mesh Root, providing Internet access and management of Mesh VigorAPs directly.
4 Gigabit LAN Ports with VLANs
The Vigor 2765 series provides 4 Gigabit LAN ports for wired links to Computers, Servers and Network Attached Storage.
2 LAN subnets and VLANs allow the Vigor 2765 to provide a guest network fully separate from internal network data. Or any other configuration that can use 2 subnets, whether that's 2 wireless networks with different IP ranges, or a separate LAN subnet for printers and server. Each network can have its own Content Filtering, Firewall, Quality of Service and Route Policy configurations.
The router has full support for 802.1Q VLAN tagging, so that these subnets can be passed to other devices that support VLAN tags, such as the DrayTek VigorSwitch G1080 8-port switch, for additional network ports.
Designed for Central Management
The Vigor 2765 series can be centrally managed along with VigorAP's and switches, with the VigorACS central management platform.
This scalable solution provides visibility, control and reporting of your entire DrayTek product estate, ideal for dealers/SIs managing customers' devices or any user who wants to know what's going on with their devices. VigorACS also provides features like automated/bulk firmware updates, VPN management and alarms for connectivity or other issues.
Robust & Comprehensive IPv4 / IPv6 Firewall
Security is always taken seriously with DrayTek routers. The firewall protects against attacks including DoS (Denial of Service) attacks, IP-based attacks and access by unauthorised remote systems. Wireless, Ethernet and VPN are also protected by various protection systems.
The DrayTek object-based firewall enables you to create combinations of Firewall rules and Content Filtering to suit a home or small office environment, applying Content Filtering to the whole network, only specified devices or just the network that guests can connect to.
The Vigor 2765 supports both IPv4 and IPv6 with Dual-Stack IPv4/IPv6. Advanced networking features, such as the object-based Firewall, Quality of Service, Content Filtering and VLANs support both IPv4 and IPv6 networks.
Web Content Filtering with DNS Filter
The content control features of the Vigor 2765 allow you to set restrictions on web site access, blocking download of certain file or data types, blocking specific web sites with whitelists or blacklists, blocking IM/P2P applications or other potentially harmful or wasteful content. Restrictions can be per user, per PC or universal and according to time schedules.
Content filtering can also block sites using HTTPS/SSL where URLs are encrypted (and normal routers cannot block).
Using the GlobalView service, you can block whole categories of web sites (e.g. gambling, adult sites etc.), subject to an annual subscription, which is continuously updated with new or changed site categorisations or sites which have become compromised (such as infected with Malware). A free 30-day trial is included with your new router.
DrayDDNS - DrayTek Dynamic DNS Address
DrayTek provides a free Dynamic DNS address to each Vigor 2765 router, allowing you to link the router's current IP address to a memorable "drayddns.com" hostname, such as "vigor2765.drayddns.com".
This address automatically updates whenever the Internet connection's IP changes, so if one WAN’s IP address allocation is dynamic, or the IP changes when switching from the primary WAN connection to a backup, you can easily locate and access your Vigor 2765 router. Just use the hostname to access the router's VPN services, management and any other services you have made accessible through the router.
The Vigor 2765 can also authenticate your DrayDDNS hostname with free SSL/TLS certificates provided by LetsEncrypt, the router manages and automates the certificate process. Keeping the certificate up to date and ready for use with SSL VPN and other services.
Quality of Service with App QoS
Prioritise latency-sensitive applications on your network with Quality of Service. App QoS simplifies setting up Quality of Service significantly, simply select which applications or services to prioritise, such as Zoom and Skype.
Use 4 separate queues to give priority to servers & PCs (IP address), services such as VoIP or DNS, or packet tagging used by IP phones with 802.1p and DSCP support. Auto Voice VLAN allows the router to automatically prioritise VoIP calls as they pass through the router without additional configuration.
Control throughput with Bandwidth Limit, by setting speed limits for all clients individually, groups of IPs, or a shared bandwidth limit for a whole subnet, such as a Guest network.
Multi-Purpose USB Ports
The Vigor 2765 has two USB ports which can be used for 4G/LTE modem, USB temperature sensor, storage, or a printer for shared access.
Connect a USB 4G/LTE modem to the Vigor 2765 and use mobile broadband as your Internet connectivity. That can be your primary connection or the router can switch over to 4G, in the case of ADSL/VDSL outage so that you're always connected.
Use your Vigor 2765 as a network attached storage (NAS) by connecting a USB flash drive or hard drive. With Windows networking (SMB) & FTP connectivity to allow Windows, Apple, Android and Linux devices to access the router's storage, locally and through VPN.
